Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

Board-level EMI shielding: DIY in minutes

ProtoShield sheets from Tech-Etch are depth-etched with a checkerboard pattern for folding, so they can be easily formed into many diverse configurations. In the product-development stage, fully functional shields can be created in minutes with just a pair of scissors and a straight edge for folding. Offered in two sizes: standard (.25-in. squares) and metric (5-mm squares). Both versions are solderable and corrosion resistant due to nickel silver material. Shield prototypes can be directly soldered to the board, or shield clips can be used for easy mounting. Samples available.
Learn more.

Isolated probing tech for fast-switching power device testing

Keysight Technologies has developed an optically isolated differential probing family dedicated to enhancing efficiency and performance testing of fast-switching devices such as wide-bandgap GaN and SiC semiconductors. Validation of floating half-bridge and full-bridge architectures commonly used in power conversion, motor drives, and inverters requires measurement of small differential signals riding on high common-mode voltages. This measurement can be challenging due to voltage source fluctuations relative to ground, noise interference, and safety concerns.
Learn more.

Protect sensitive electronics in explosive environments with new aluminum ATEX Cabinet Cooler Systems

EXAIR's ATEX Cabinet Cooler^® Systems deliver a powerful and affordable solution for keeping electrical enclosures cool in hazardous ATEX classified areas -- and they're now available in durable aluminum construction. Engineered for use in Zones 2 and 22, these coolers are UL tested, CE compliant, and meet stringent ATEX standards for purged and pressurized enclosures. With cooling capacities up to 5,600 Btu/Hr., ATEX Cabinet Coolers are ideal for preventing overheating in electrical cabinets. EXAIR offers a comprehensive lineup of systems.
Learn more.

PLC handbook chock full of must-know information

Automation-Direct's Practical Guide to Program-mable Logic Controllers Handbook has been improved with tons of new need-to-know info, making it a more comprehensive guide to the world of PLCs. Besides covering the basics of PLC history, PLC hardware, and PLC software, this guide takes you deeper into the ever-changing world of PLC communication, the importance of feedback loops, cyber security, and many other areas that are a must-know for any PLC novice or seasoned automation professional.
Get this great resource today.

Haptic feedback prototyping kit from TDK

Get your customers to feel the difference your products make. TDK has released a development starter kit for fast haptics prototyping. It gives mechanical designers and engineers first impressions of the haptic feedback using PowerHap piezo actuators, shows how the mechanical integration works, and provides a reference design. Applications include automotive, displays and tablets, household appliances, vending machines, game controllers, industrial equipment, and medical devices.
Learn more.

Mini ESD preset torque screwdriver

Need precision fastening with ESD protection at the smallest torque levels? Mountz has you covered. The new FG Mini ESD Preset Torque Screwdriver is built for low-torque, high-precision tasks. Its compact design makes it ideal for tight spaces and small fasteners, while delivering the same reliable control and ESD protection users have come to expect from Mountz. Two models available: FG25z (3 to 25 ozf.in, 2 to 17.7 cN-m) and FG50z (20 to 50 ozf.in, 14.1 to 35.3 cN-m).
Learn more.

Laumas load cells and electronics from AutomationDirect

Automation-Direct has added Laumas precision-engineered load cells, transmitters, and accessories that deliver reliable performance in industrial weighing and force measurement applications. The FCAL series high-precision bending beam load cells are ideal for low- to mid-capacity systems. CTL series load cells are designed for both tension and compression, with excellent linearity. The CBL series low-profile compression load cells are perfect for space-limited applications. Laumas load cell transmitters are available too for precise monitoring and control. Very good pricing.
Learn more.

Engineer's Toolbox: What is ground loop feedback?

Improper grounding can create problems in data logging, data acquisition, and measurement and control systems. One of the most common problems is known as ground loop feedback. Experts at CAS DataLoggers run through five ways to eliminate this problem.
Read the full article.

What is a braking resistor?

According to Automation-Direct, "Braking resistors don't actually provide braking directly -- rather, they allow a drive to stop a loaded motor faster." Why is this important? Protect your AC or DC drive system from regenerative voltage that can create an over-voltage fault on the drive -- especially with high inertial loads or rapid deceleration.
View the video.

New Digital Static Meter: Precise measurement, easy use

Static electricity isn't just a nuisance; it's a serious threat to manufacturing efficiency, product integrity, and workplace safety. Unchecked static can lead to costly downtime, product defects, material jams, and even hazardous shocks to employees. If static is interfering with your processes, EXAIR's upgraded Model 7905 Digital Static Meter offers an essential first step in identifying and eliminating the problem. With just the press of a button, this easy-to-use, handheld device pinpoints the highest voltage areas in your facility, helping you diagnose static issues before they become a problem.
Learn more.

New laser cutting modulating strategy tested with Mikrotron high-speed camera

Modulating a laser beam's intensity distribution optimizes energy delivery to the process zone, resulting in better cutting speed, cut edge quality, and cut kerf geometry. Scientists in Belgium have come up with a new method that they say produces better cutting results.
Read the full article.

All-in-one embedded PLC based on Raspberry Pi 4 -- build control applications

The new PLC CPI-PS10CM4 from Contec Co. is a compact embedded programmable logic controller (PLC) that is loaded with CODESYS, the world's most widely used software PLC. This product uses Contec's original single-board computer, which is based on Raspberry Pi's latest embedded module, the Compute Module 4 (CM4). By using the wide range of peripheral devices for Raspberry Pi, such as Contec's CPI Series, you can build various control applications in a PLC language that complies with the IEC 61131-3 international standard.
Learn more.

Torque sensors for fastening applications and more

Saelig Company has introduced the Sensor Technology SGR525/526 Series Torque Sensors to provide precision torque monitoring that is critical for performance and safety. The square drive design (for applications with non-cylindrical shafts) allows for seamless integration into power tools, test rigs, industrial machinery, and precision fastening applications, ensuring superior torque measurement without the need for additional adapters or modifications. The SGR525 offers torque measurement only, while the SGR526 provides torque, speed, and power measurement using a 360-pulse-per-revolution encoder. Industries include automotive, aerospace, manufacturing, and research and development.
Learn more.

Wide-angle camera optimized for larger, faster conveyor belts

Wider conveyor belts operating at higher speeds are now commonplace in modern logistics. To keep up, SVS-Vistek is offering a cost-effective alternative to multi-camera systems with its fxo901CXGE 10-GigE color camera featuring the Sony IMX901-AQR wide-aspect global shutter 16.4-megapixel CMOS sensor. Unlike standard cameras, this unit captures targets in a wide field of view while maintaining high resolutions. The 4:1 horizontal aspect ratio allows one fxo901CXGE to replace an entire multi-camera system, removing the need for image synchronization.
Learn more.

Handheld thermal imager cuts diagnostic time

The FLIR TG268 is a next-generation thermal imager that provides professionals in the utility, manufacturing, electrical, automotive, and industrial sectors with a lightweight, handheld, affordable condition monitoring tool. Latest enhancements include higher temperature ranges, improved resolution, and larger data storage capacity. Go beyond the restrictions of single-spot IR thermometers to view and evaluate hot and cold spots that may signify potentially dangerous issues. Accurately measure temps from -25 to 400 C. Native thermal images improved with Super Resolution upscaling.
Learn more.

Researchers prove fundamental limits of electromagnetic energy absorption

Electrical engineers at Duke University have determined the theoretical fundamental limit for how much electromagnetic energy a transparent material with a given thickness can absorb. The finding will help engineers optimize devices designed to block certain frequencies of radiation while allowing others to pass through, for applications such as stealth or wireless communications.

"Much of the physics of the known universe already have fundamental solutions or are too complex to get an exact answer," said Willie Padilla, professor of electrical and computer engineering at Duke. "In any field, finding a truly novel, fundamental, exact result like this is rare."

The research appeared online March 8 in the journal Nanophotonics.

Whether building an antenna or developing sunscreen, there are many instances where certain types of light need to be absorbed. One trick to maximizing that amount is increasing the thickness of the material absorbing the energy.

However, the needed thickness for a transparent material to provide that absorption was unknown until now.

More than 20 years ago, Konstantin N. Rozanov of the Institute for Theoretical and Applied Electrodynamics in Moscow, Russia, figured out the most light over a range of wavelengths that a device of a certain thickness could absorb if one side was lined with metal. This scenario creates a boundary on one side where all light either reflects back or is absorbed, providing a constraint that allows a certain mathematical approach to crack the problem.

Taking away that metal edge and allowing the light to continue through, however, is a horse of an entirely different color on the electromagnetic spectrum.

"Rozanov used a clever trick where he worked in wavelength instead of frequency," said Yang Deng, a research assistant working in Padilla's laboratory. "But several researchers have since tried using that approach to this problem and failed."

To come up with a new mathematical approach, Padilla and Deng collaborated with Vahid Tarokh, the Rhodes Family Professor of Electrical and Computer Engineering at Duke. Tarokh's research spans a wide range of topics while pursuing new formulations and approaches to getting the most out of datasets.

Without getting too deep into the mathematical weeds, it can be said that Tarokh was able to figure out how to shape the problem so that it could be solved, pulling a rabbit from a mathematical hat.

"Hindsight is 20/20, but even mathematicians call these creative strategies 'tricks,'" Padilla said.

Beyond the novelty of solving a long-sought-after problem, the researchers say their work has practical implications in several areas. Metal-backed absorbers won't let any type of electromagnetic energy pass through. However, there are certain applications where you might want to block some frequencies while letting others pass.

For example, cellular phones might want to be able to block certain types of harmful electromagnetic radiation while letting others like GPS or Bluetooth through. Knowing what the fundamental limits of this type of goal will allow engineers to know when more work optimizing their design will not be worth the effort.

Source: Duke University

Published March 2024

Rate this article