Universal Robots avoid collisions, handle heat induction, and pick up in 3D at ATX East
Attendees at UBM's ATX East in New York City (June 13-15) will be greeted by three collaborative robots from Universal Robots at the expo's entrance. Moving through pre-programmed cycles, the cobot arms equipped with monitors will feature videos of a wide variety of industrial tasks now handled by Universal Robots -- from CNC machine tending to polishing, wire cutting, injection molding, and pick-and-place applications. As in many of their real-life installations, the cobots will be placed in a high-traffic area where they will operate with no safety guarding alongside people.
On the expo floor, attendees can interact with the UR cobots at Universal Robots' own booth #2529 at the ATX East section of the show, where a UR5 robot arm will be showcased in a new demo (see below) featuring collision avoidance and real-time adaptive pick-and-place scenarios with UR partner Energid, a developer of software for robots and machine vision. The UR5 will pick "widgets" out of a feeder that moves around and is dynamically tracked by the vision-guided cobot. Using a wand, a person can interact with the collaborative robot, and the robot will avoid the wand while attempting to reach the widget.
"The ability for the robot to 'dodge' the wand is an example of what we believe will be the next generation of collaborative robots," says Neil Tardella, CEO of Energid. "Soon, robots will be able to avoid collisions with people altogether rather than just stopping once a collision occurs. We believe that there is a large market for robots that can perform tasks in a semi-structured environment where the requirement for precise positioning of fixtures and parts is relaxed, making setup and programming of the UR cobots even easier."
The Energid software is now also part of the rapidly expanding Universal Robots+ platform featuring plug-and-play products for the UR robot arms.
Robotic Vision Technologies will be demonstrating their new single-camera 3D guidance application for UR robots. The demonstration (see below) will show a UR5 picking randomly placed parts off a conveyor and precisely placing them in a movable tray in both 3D and 2.5D. "The demo highlights the flexibility that 3D vision brings to imprecise hardware or part presentation in automated assembly," says Paul Weidinger, VP of Engineering at Robotic Vision Technologies. "With 3D vision, the UR can now be utilized in more applications, while keeping integration costs low."
VIDEO: Robotic Vision Technologies' demonstration on a Universal Robot.
Also in UR's ATX booth is MAX by Ambrell, the world's first heat induction cobot. The demo at ATX East will show MAX moving stainless steel rods into an induction heating coil, where the rods will be heated to 600°C in just seconds by an Ambrell EASYHEAT induction heating system and then moved forward in the process. "An adaptation for this tradeshow demonstration could be preheating rods for hot heading or forging industrial fasteners, delivering an innovative induction heating solution designed specifically to maximize manufacturing throughput," says Ambrell's president, Tony Mazzullo. "MAX can perform a variety of light industrial -- usually repetitive -- tasks, and interacts safely and efficiently as it works hand in hand with humans in a shared process."
Ambrell's MAX is the world's first heat induction cobot.
Another repetitive task now automated by UR robots is passport stamping; attendees visiting the UR booth, participating in the show's "Passport Tour," can get their "passport" stamped by a cobot and then be entered into a daily prize drawing.
At booth #2644, READY Robotics will be showcasing the TaskMate system (see below), a fully integrated turnkey solution that incorporates the Universal Robots collaborative robot line. The TaskMate R3, utilizing a UR3 arm, will show the system flexibility through a series of dynamic interactive demonstrations. "READY Robotics is working to change the way customers approach robotic automation by providing a fully plug-and-play platform architecture, allowing customers to easily build whatever automation system they need for a given application," says Ben Gibbs, CEO of READY Robotics. "By integrating with Universal Robots, we are able to leverage tremendously useful robot hardware to further reduce the integration overhead customers and integrators experience in trying to address their automation application needs."
VIDEO: Introducing the TaskMate from READY Robotics, a platform for robotic automation built from the ground up to be flexible and easy to use.
Universal Robots' Dillman is excited to share these applications with the ATX East audience. "We see a collaborative robot as a tool on demand as needed -- one that can quickly be transitioned between a wide variety of automated tasks. Flexibility in manufacturing involves the ability to deal with variation in volumes, design, and material handling as well as variations in the process sequences. We look forward to showcasing these important capabilities at the show," he says.