High-force voice coil motor
Moticont has added a new high-force voice coil motor to its GVCM family of voice coil motors with an internal shaft and bearing. The GVCM-095-089-03 Linear Voice Coil Motor (also known as linear DC motor) features a continuous force of 63.9 lb (284.1 N) and 202.0 lb (898.4 N) of peak force at a 10 percent duty cycle. Guided by a long-life plain bearing that can allow side loads up to 3 lb (13.5 N), the precision-ground 0.236-in. (6-mm) diameter shaft with an internal thread has a stroke length of 0.5 in. (12.7 mm). Motion is quiet, efficient, smooth, and cog-free. Ideal for clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.
High-precision vertical elevator stage
Optimal Engineering Systems (OES) has released two new high-precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm, respectively. The vertical motion of each Z-Axis Stage is driven by an 8-mm-diameter ball screw with a 1-mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns, make these two Z-Axis Stages ideal for microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.
Ideal choice for running two linear motion systems in parallel
Bishop-Wisecarver invented the DualVee guide wheel over 50 years ago in four sizes of carbon steel as a component-based problem solver for harsh, debris-laden environments. Now it's 2019, and they offer product options that include UtiliTrak linear guides and LoPro linear actuators to complete actuated system solutions. LoPro Linear Actuators excel in high-speed, long-length, and dirty environments. UtiliTrak is constructed with DualVee Motion Technology in vee and vee/crown designs, and using MadeWell Crown Rollers it is perfect for commercial applications in need of a compact, easy-to-install, and low-maintenance solution. Both are available as part of the Bishop-Wisecarver QuickShip Program (ships from the facility within 3 business days).
Compact stepper motor with high torque
With the SCA5618, Nanotec now offers a stepper motor with 15 to 30 percent more torque than comparable motors with a 56-mm flange (NEMA 23). Thanks to an improved stator geometry and optimized magnetic materials, the rotor inertia is no higher than that of the predecessor model. The SCA5618 is available in three lengths and with two different windings. Depending on length, the holding torque of this stepper motor is 0.6 to 2.3 Ncm; it has a resolution of 1.8 deg. For a higher resolution, the SCA5618 can also be combined with an optical or magnetic encoder. The integrated connector makes it easy to connect customized cables or replace an existing motor.
Cobots load and unload Haas CNC machines
Loading and unloading CNC machines is becoming one of the most popular applications for collaborative robots as manufacturers face significant difficulties in staffing this tedious task. A new distributor agreement between Universal Robots and Phillips Corp. aims to further the rapid deployment of cobots with Haas CNC machines, offering machine shops a safe, user-friendly solution to optimize spindle uptime. Haas provides the best-selling CNC machines in the Western Hemisphere, and Phillips is the world's largest Haas Factory Outlet. "Having an expensive machine sit idle and missing out on orders due to lack of staffing is every manufacturer's nightmare," says Stu Shepherd, regional sales director for the Americas division of Universal Robots, which has already sold more than 1,000 UR cobots for tending Haas CNC machines.
Watch cobots tending CNC machines and learn more about this partnership.
New Orbex brushless servo motors enhance efficiency
The Orbex Group, known for high-performance slip rings, now offers brushless servo motors that combine high torque, low inertia, and various customizable options to improve efficiency in dynamic servo-driven applications. Available in a range of frame sizes (60 to 176 mm), NdFeB-based brushless servo motors include incremental encoders for position feedback and electrical commutation -- enhancing motor efficiency, minimizing maintenance requirements, and increasing throughput. Customizable features include windings, brakes, additional feedback options, connectors, and custom mounting options. Frameless configurations are also available. The motors offer smooth, low-cogging motion and IP65-level protection. Typical applications include communications, security and AGVs, defense, packaging, robotics, and more.
New pan-tilt stages ideal for positioning, inspection, assembly
A pair of high-resolution, motorized pan-tilt stages has been added to the extensive line of OES (Optimal Engineering Systems) motion control products. The PT60-1 Pan-Tilt Stage is a combination of two 60-mm (2.362-in.) rotary stages, and the PT100-1 is a combination of two 100-mm (3.937-in.) rotary stages, set at a 90° angle to each other. The rotary stage of each pan-tilt unit features a high repeatability of 0.005° (18 arc-sec), a positional accuracy of 0.005° (18 arc-sec), and a resolution of 0.001° = 3.6" (10 micro-steps per step motor driver in use). They are ideal for scanning, testing, inspection, assembly, positioning, laser and micro machining, pointing optics and cameras, and other applications.
Replacing hydraulics with electric actuators -- avoid pitfalls, gain the benefits
Electric actuators continue to find new and exciting places within automation processes from the mundane to some of the most extreme operating environments on the planet. Every day, machine designers seek alternative electric solutions to hydraulic cylinders for the very first time. However, there are many common pitfalls to properly sizing an electric equivalent. When sized correctly, replacement with high-force electric linear actuators can provide tremendous benefit in processes, quality, and reducing your total cost of ownership.
Read this informative Tolomatic blog.
Precision motion for X-ray optics
Despite their potential danger, X-rays are one of the most powerful instruments and resources utilized in medical diagnostics to help medical professionals restore health by identifying the correct prognosis. When it comes to achieving the best imaging with the lowest X-ray exposure, lenses made by Optec are almost inevitably involved. Their aperture, focus, filters, and zoom are precisely moved by FAULHABER DC motors.
Read the full article.
Important Qs about linear motor actuators that design engineers should ask
Many design engineers overestimate how accurate traditional motors and actuators stay over long travel runs, mistakenly believing that if the solution works well for short runs, it will work equally well on long ones. Do you know what type of actuator you should use for your application? Patrick Lehr, Product Manager, Precision Mechanics at Parker Hannifin, has some really good tips for you.
Read the full article.
Small DC motors for spectrophotometry
The DeNovix team needed a motion solution for their spectrophoto-meter application which called for intermittent short, quick motions with micron-level accuracy. After research and testing, they chose a FAULHABER small DC motor configured with a MICROMO encoder and an all-plastic planetary gearhead to successfully bring their product to market.
Read the full article.
Integrated brushless servo motor and controller
Save money and space by utilizing the EC042B 42-mm IDEA Motor's integrated package of motor, drive, and feedback connections in a compact and programmable unit. A single motor/drive unit reduces motion system components by up to 75 percent per axis and simplifies machine troubleshooting -- all while providing excellent precision. Further reductions can be achieved by wiring sensor inputs and control outputs directly to the IDEA Motor, rather than through a control cabinet. Available in three motor lengths with continuous torque up to 0.15 Nm from Haydon Kerk Pittman. Applications include lab automation, medical devices, communications equipment, aerospace systems, and more.
Extreme-force electric actuator for press and punch
Tolomatic's RSX extreme force electric actuator family has been expanded -- this time with more options capable of replacing hydraulic cylinders. The new RSX096P Press Model is designed for pressing, punching, clinching, joining, and other applications requiring extreme force. This hydraulic-class actuator is capable of forces up to 40,000 lbf (178 kN). It features Tolomatic planetary roller screw technology for long life and consistent performance.
New optical joysticks for medical and military
CTI Electronics (an affiliate of Electro Switch Corp.) has launched a new line of optical joystick motion controllers and mouse pointing devices. Made in the USA, LightStick Series controllers exceed medical and military performance standards for electromagnetic and RF disturbance in applications to 200 V/m -- without additional shielding. The LightStick's patented noncontact optical sensor technology ensures highly repeatable operator feedback for the life of the controller -- up to 10 million cycles and a MTBF greater than 10 years of operation.
Just out! THK introduces TRK Robot Hand assembly
THK America is known for being a leader in linear motion guides, but now they're stretching their reach into the end-effector market. The Schaumburg, IL-based company has just added the Type TRX Robot Hand to its quality lineup.
Hyundai develops world-first Active Shift Control transmission tech for hybrids
Hyundai Motor Group has developed the world's first Active Shift Control (ASC) transmission technology. The innovation optimizes transmission efficiency by monitoring gear shifts 500 times per second, precisely adjusting the transmission rotation speed for faster shift times. The new technology will premiere in the upcoming Hyundai Sonata Hybrid and eventually benefit other upcoming Hyundai and Kia hybrids.
ASC applies new control logic software to the Hybrid Control Unit (HCU), which then controls the electric motor to align the rotational speeds of the engine and transmission to reduce gear shift time by 30 percent. The technology also delivers smoother gear changes despite quicker shift times.
"The development of world's first ASC technology is a remarkable innovation which incorporates precise motor control to automatic transmission," said KyoungJoon Chang, Vice President and Head of Powertrain Control System Group of Hyundai Motor Group, "It will not only save fuel but also provide a more fun driving experience for our customers."
Innovation: Independently developed control logic software applied to the electric motor
Conventional hybrid vehicles do not have torque converters in order to further improve fuel economy, as torque converters lose energy during the process of transmission. Although fuel efficient, such a system also requires longer shift times to ensure smoother gear changes.
ASC technology allows the hybrid's electric motor to also take control of gear shifts by applying new software logic to the Hybrid Control Unit (HCU) to mitigate issues with slower shift time. The HCU monitors the rotational speed of transmission with a sensor installed inside the electric motor at 500 times per second to quickly synchronize the rotational speed with that of the engine.
With the synchronization, shift time is reduced by 30 percent from 500 ms to 350 ms. This not only improves the hybrid vehicle's acceleration performance and fuel economy, but also the durability of the transmission by minimizing friction during gear shifts.
Source: Kia Motors Corporation
Published September 2019
Rate this article